丝瓜APP官网下载安装IOS_丝瓜污污视频_丝瓜下载黄色_丝瓜APP官网下载地址安卓版

設備展示

EQUIPMENT DISPLAY

玻璃升降器流水線

本生產線滿足左前、左后、右前、右后的玻璃升降器裝配要求(產品和工藝) This production line meets the assembly requirements of the glass lifters (products and processes) at left front, left back, right front and right back.

關鍵詞：

玻璃升降器流水線

在線咨詢：

詳情描述

 
本生產線滿足左前、左后、右前、右后的玻璃升降器裝配要求(產品和工藝)。
2. 每個工位采用人工手動喂料,人工出料,工位與工位之間采用不銹鋼滑槽或旋轉料架交替輸送。
3.生產線采用單件流動原則,工位與工位之間按1-10件緩存設計。
4.生產線總共設計3個工位，每個工位基本平衡，工位時間節拍為40S/件，每天8小時產量約為700件。
5. 每個工位對易錯裝,漏裝,和反裝的零件,適當應用防錯技術,對其進行防錯監控。
6. 每個工序完成，人工對相應的裝配特性（錯漏裝，是否到位，運轉性能等）進行自檢，并作相應標記 。
7.檢測設備滿足檢測項目為：上升時間/速度、上升電流、堵轉電流、堵轉力、彈簧彈出量、傳動掣高低差檢測；檢測數據通過工控機進行分析，通過條碼打印機打印條碼。
8.終檢設置外觀檢測臺：對易錯漏裝的零件，外觀件，產品性能等項目人工再次確認。
9.按流程進行不合格品控制，質量管理，工藝管理。
10.適當應用設備管理，安全，人機工程,快速換模換線,外觀等技術。
This production line can meet the assembly requirements of glass lifters (products and processes) of left front, left back, right front and right back.
2. Each station adopts manual feeding and manual discharging. Stainless steel chute or rotating material rack is used for alternating conveying between stations.
3. The production line adopts the principle of single piece flow, and the buffer design between stations is 1-10 pieces.
4. The production line is designed with 3 stations in total, and each station is basically balanced. The time of each station is 40S/ piece, and the output is about 700 pieces in 8 hours per day.
5. Each station shall properly apply the error-proof technology to the parts that are easy to be misinstalled, misinstalled, and backloaded, and shall conduct error-proof monitoring.
6. After each process is completed, the corresponding assembly characteristics (wrong and missing installation, whether in place, operation performance, etc.) shall be manually self-checked and marked accordingly.
7. The test equipment can meet the test items: rising time/speed, rising current, blocking and turning current, blocking and turning force, spring ejector volume, transmission switch difference detection;The test data is analyzed by ipc and printed by barcode printer.
8. Set up appearance testing platform for final inspection: manually confirm the parts, appearance parts and product performance that are easy to be installed by mistake.
9. Control non-conforming products, quality management and process management according to the process.
10. Appropriate application of equipment management, safety, ergonomics, quick change of mold and wire, appearance and other technologies.

相關設備

圖片名稱

在線咨詢

提交留言