設備展示
EQUIPMENT DISPLAY
旋轉剝皮機
設備組成：?旋轉剝皮機由機體、夾持裝置、剝皮裝置、旋轉裝置、剝皮長度設置裝置、可編程控制器等組成。?工作原理?通過夾持氣缸將工件夾緊后，剝刀收緊，旋轉氣缸將鋼絲表層膠皮切斷，然后剝皮氣缸將表層膠皮剝掉，最后夾持氣缸復位，進入待機狀態。?設備特征?該機設計巧妙，用于剝離規定長度的涂塑鋼絲繩和直絲管和以往剝皮不同的是旋轉剝皮，剝皮效果好且剝離直徑大，工作效率高，故障率低，使用壽命長，互換性強，適用于不同規格的涂塑鋼絲繩和直絲管剝皮工序。
Equipment composition: Rotary peeling machine is composed of body, clamping device, peeling device, rotating device, peeling length setting device, programmable controller, etc.After the workpiece is clamped by the clamping cylinder, the stripping knife is tightened, the rotating cylinder cuts off the steel wire surface rubber, and then the peeling cylinder strips off the surface rubber, and finally the clamping cylinder is restored and enters the standby state.The machine is designed for peeling plastic wire rope and straight wire pipe of specified length. What is different from the previous peeling is the rotary peeling, with good peeling effect and large diameter, high working efficiency, low failure rate, long service life and strong interchangeability. It is suitable for peeling plastic wire rope and straight wire pipe of different specifications.
關鍵詞：
旋轉剝皮機
所屬分類：
詳情描述
設備組成：
旋轉剝皮機由機體、夾持裝置、剝皮裝置、旋轉裝置、剝皮長度設置裝置、可編程控制器等組成。
工作原理
通過夾持氣缸將工件夾緊后，剝刀收緊，旋轉氣缸將鋼絲表層膠皮切斷，然后剝皮氣缸將表層膠皮剝掉，最后夾持氣缸復位，進入待機狀態。
設備特征
該機設計巧妙，用于剝離規定長度的涂塑鋼絲繩和直絲管和以往剝皮不同的是旋轉剝皮，剝皮效果好且剝離直徑大，工作效率高，故障率低，使用壽命長，互換性強，適用于不同規格的涂塑鋼絲繩和直絲管剝皮工序。
Equipment composition:
The rotary skinning machine consists of an airframe, a clamping device, a skinning device, a rotating device, a skinning length setting device and a programmable controller.
The working principle of
After clamping the workpiece through the clamping cylinder, the stripping knife tightens, the rotating cylinder cuts off the steel wire surface rubber, then the peeling cylinder strips the surface rubber, and finally the clamping cylinder resets and enters the standby state.
Device characteristics
This machine is designed skillfully, used to peel the specified length of plastic coated steel wire rope and straight wire tube and the previous peeling is different from the rotation peeling, peeling effect is good and peeling diameter, high efficiency, low failure rate, long service life, strong interchangeability, suitable for different specifications of plastic coated steel wire rope and straight wire tube peeling process.
相關設備
一家集設計、開發、制造、銷售為一體的非標設備生產企業。
重慶翔睿捷自動化設備股份有限公司
Copyright ? 2023 重慶翔睿捷自動化設備股份有限公司